Design Rule Check Report
------------------------

Report File    : D:\CAD\User\Development\CTS-E\CTS-E (PCB - Design Rule Check Report).txt
Report Written : Tuesday, June 25, 2013
Project Path   : D:\CAD\User\Development\CTS-E\CTS-E.prj
Design Path    : D:\CAD\User\Development\CTS-E\CTS-E.pcb
Design Title   : 
Created        : 01/05/2013 19:05:01
Last Saved     : 25/06/2013 05:18:50
Editing Time   : 1120 min
Units          : mm (precision 3)

Results
-------

Track to Board Error (T-B) between (70.000 93.500) and (70.000 96.000) on Layer "Bottom Copper".
    Error between Track (Net 'N0015') and Board, Gap is 1.802 needs to be 2.032.

Number of errors found : 1

Accepted Errors already in the design
-------------------------------------

No errors found

Settings
--------

Spacings

    Tracks                             Yes
    Pads and Vias                      Yes
    Shapes                             Yes
    Text                               Yes
    Board                              Yes
    Drills                             Yes
    Components                         No

Manufacturing

    Drill Breakout                     No
    Drill Backoff                      No
    Silkscreen Overlap                 No
    Wires                              No
    Component Height                   No
    Copper Text In Board               No
    Min Track Width                    No
    Neck Length                        No
    Min Annular Ring                   No
    Min Paste Size                     No
    Vias In Pads                       No
    Unplated Vias                      No
    Unplated Pads With Inner Tracks    No

Nets

    Net Completion                     Yes
    Dangling Tracks                    Yes
    Net Track Length Differences       No


End Of Report.
